If you're interested in a group user or multi-user plan, contact us below.
To purchase training products or to learn more about our training solutions, please contactyour local SMC representative.
Purchased e-learning courses can be accessed through theTraining Services Portal.
Need help with course selection, service agreements, or more? Please email ourE-Learning Specialist, or call (417) 865-2825
本课程(CCP143-EL)提供额外的诺里居民区上空dge of common controller terms and operation. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines, organizing controller data, configuring modules, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices, sharing data between controllers, and controlling remote I/O.
This course covers tasks common to the following hardware, which all use the Logix5000 control engine:
This course (CCP146-EL) teaches you how to perform basic Logix 5000™ and Studio 5000 Logix Designer® tasks, such as:
The course will assist you in developing and building a solid foundation with a fundamental knowledge of Logix 5000 systems. You will be introduced to basic Logix 5000 concepts and terminology.
Individuals who have little or no working experience with Logix 5000 systems or other programmable controllers should attend this course.
To successfully complete this course, you must be able to perform basic Microsoft Windows tasks.
This course (CCP151-EL) provides you with the resources to program basic ladder logic instructions for Logix 5000™ controllers. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
This course is for programmers who have little or no working experience with controllers, are responsible for programming Logix 5000 controllers using the Logix Designer application, and need to learn how to draft ladder logic for any application.
To successfully complete this course, completion of the Studio 5000 Logix Designer Level 1: Logix 5000 System Fundamentals course (Course No. CCP146) or equivalent experience is required.
This course (CCP152-EL) is a skill building programming course that provides you with an understanding of Studio 5000 Logix Designer® function block diagrams and terminology. You will learn how to perform parameter modifications to individual function block instructions, as well as create and develop function block diagram programs and routines. You will also gain experience with a variety of function block instructions, including PIDE and add-on instructions.
This course (CCP154-EL) provides the skills and knowledge to program using the structured text and sequential function chart programming languages in Studio 5000 Logix Designer®. You will learn how to select instructions, expressions, and constructs and then enter these elements and more into a routine. You will have an opportunity to translate a functional specification into a sequential function chart. Also, you will learn how to test sequential function chart logic using forces and step throughs.
This course (CCA182-EL) provides you the ability to properly install a PowerFlex 750-Series drive, start up the drive, and configure drive parameters to meet application-specific needs. Throughout the course, you will have the chance to use a variety of software tools, including:
This course (CCA183-EL) introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a PowerFlex 750-Series (PowerFlex 753 or 755) drive. You will learn how to recognize PowerFlex 750-Series drive hardware and diagnose specific faults.
Throughout the course, you will learn a variety of maintenance troubleshooting tools, including:
This course (CCA184-EL) provides you guidance on how to integrate your PowerFlex 753 or 755 drive into a system that includes:
Throughout the course, you will learn a variety of hardware and software tools, including:
This course (CCA185-EL), you will learn how to properly start up the PowerFlex 525 drive and configure drive parameters to meet application-specific needs. You will learn about the various hardware and software tools, including:
This course (CMP100-EL) provides you with the skills needed to add devices and program application code using Connected Components Workbench™ software. You will also be introduced to component-level devices such as:
This course (CCN132-EL) provides the ability to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. This course is designed to provide you with an understanding of the concepts, terminology, functionality, and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems.
This course (CCN144-A-EL) will teach you to configure, test, tune, and program CIP Motion™ axes using the Studio 5000 Logix Designer® application.
Building upon the skills gained in the Studio 5000 Logix Designer Level 3: Project Development course, you will learn how to apply the Logix 5000 architecture to a multi-axis CIP motion control system. You will also practice efficient programming skills necessary for translating a machine specification document into reliable ladder logic code. Because all Logix 5000 products share common features and a common operating system, you will be able to apply the motion control configuring and programming skills you learn in this course to any of the Logix 5000 controllers that are capable of motion control.
This course (CCV204-A-EL) provides guidance on how to produce an operational application. This application will run on a PanelView Plus 7 terminal using a computer with FactoryTalk View ME software and a PanelView Plus 7 terminal.
This course (CCV207-EL) provides guidance on how to organize and develop FactoryTalk® View Site Edition (SE) applications. You will have the opportunity to practice the skills used to create an application and build out graphic displays. You will learn how to configure alarms and security, trend data, and test your application using FactoryTalk View SE Client. You will also work with FactoryTalk Linx communications software and the FactoryTalk Diagnostics system.
This course (EL-ICM101-EL) is designed for the new user of vibration analysis or predictive maintenance instrumentation or for the individual that desires to become more familiar with the basics of vibration. The relationship between the mechanical condition of machinery and vibration is presented. This background helps show how vibration detection and analysis can be used in a cost-effective program to identify machinery problems and schedule repairs to avoid costly machine downtime.
This course (PRC201-EL) introduces the core components of a PlantPAx® distributed control system, including system architecture, configuration, alarms, and security. In this course, you will learn PlantPAx concepts and terminology and will be shown how to:
This course (PRC203-EL) introduces the core components of a PlantPAx 5.0 distributed control system, including HMI, alarms, and security required to operate a PlantPAx system. In this course, you will learn PlantPAx concepts and terminology and will be shown how to:
This course (CCP183-EL) provides guidance on how to configure and troubleshoot an EtherNet/IP network. This includes setting EtherNet/IP network addresses, configuring a managed switch to meet network requirements, and monitoring managed switch performance. Examples, activities, and demonstrations in this course focus on the Stratix 5700 managed switch.
This course (INA201-EL) provides controls and IT engineers knowledge to allow them to collaboratively architect a machine or process skid network. Starting from the ground up, IT and OT professionals will learn how to design a logical and physical network infrastructure for their operation.
本课程(INA202-EL)提供控制和engineers knowledge to allow them to collaboratively architect a machine or process skid network. Learn how to set up wireless architectures, the value of resiliency protocols, and how to secure a cell/area zone.
This course (INA203-EL) provides controls and IT engineers with a sufficient level of knowledge to collaboratively architect a converged multi-service plant-wide network. This course will help you operate as a credible domain expert in a multi-function team under the leadership of their counterpart.
This course (INA204-EL) provides controls and IT engineers with knowledge to collaboratively architect a smart Industrial Automation Control system using cloud technologies. Learn how Virtualization and Industrial Data Centers can help you deploy a robust network infrastructure.
This course (CCPS41-EL) builds upon your experience with basic ladder logic programming. In this course, you will learn how to program code using timer, counter, math, data handling, and comparison instructions. You will gain an understanding of project development tasks and be shown how to:
This course (FTAC-EL) provides you with the skills required to use FactoryTalk® AssetCentre software to maximize your control system investment and manage assets effectively. Throughout the course, you will be shown how to:
This course (SAF-LOG104-EL) provides you with the ability to create a Studio 5000 Logix Designer project for a GuardLogix® system and troubleshoot a previously operational GuardLogix® system. In this class, you will learn GuardLogix® concepts and terminology and will be shown how to: